Please note at this point that if you are home recording, you're going to want to switch your headphones from the drum module over to your audio interface, as the audio interface will not be feeding signal back to your module. If the track is not record armed, you will not be able to get any kind of an audio monitoring from your DAW, and thus will be unable to hear what you're playing in context of the recording. Depending on the interface this may also require a driver, so please consult the manufacturer of the interface for more information.įrom here, we're going to want to assign the input of your DAW to the interface, then open up an audio track and make sure your track is record armed. To get started you're going to need an Audio Interface. As such you may need to contact your plugin's manufacturer to see if their program allows for remapping those signals. While your manual will have information on this, it's important to note that some of our beginner level kits like the Debut and the Turbo Mesh will not have the ability to remap the pedal. Every drum program on the other hand will use a different midi note for those different hi-hat states. One last note: Alesis Hi-hat pedals have their controls all assigned to the same Midi note and trigger the states of the hi-hat based on CC value(Closed, Splash, etc.). Your user guide will have more information on changing the midi notes for your individual kits, but you may need to go to the program's manufacturer to find out what those midi notes are. Please also note that every pad on your kit is assigned a midi note that may need to be changed to trigger the right sample in the program you are attempting to use. For more information on this please see your DAW's guides. All of our devices are class compliant, so if you run into any connection issues please be sure to eliminate any hubs or connectors between the computer and your module.įrom here we're going to want to assign midi control to your DAW, make a virtual instrument track and assign a drum plugin program for the kit to control. To get started you'll only need to plug your kit directly into your computer via a USB cable. In either scenario you're going to need a DAW. For all intents and purposes this is going to need to go through an Audio interface like an M-Track Solo before it can get into your computer.īoth connections have their positives and negatives and it's important to do your own research before you try one or the other- an interface will probably cost as much as a good drum plugin that is on sale the real difference being that Midi notes can be edited and quantized for mistakes and mixing, whereas you get you get what you get from your audio output and you will need to do your mix of the drums before you begin recording. Meanwhile your main audio outputs are going to carry the actual samples that your accustomed to hearing when you play the actual kit. That means information like what drum you hit, how hard you hit it, and how long you let the note ring. Your USB output is only going to send the raw midi messages from your hits to your computer. These have very different functions and are going to determine how you proceed. You have two different types of outputs on every drum module we make- your main audio outputs and your USB output. But when it comes down to how you actually want to record your drums, a few options open up. Modified on: Mon, 19 Sep, 2022 at 3:14 PMĭrums and Drummers come from a wide spectrum of people, but anyone who uses an electric kit has done so under a very simple premise- Mic-ing acoustic drums is not fun. Solution home Alesis Support Alesis | Getting Started Alesis Drums | Connecting your Kit to a Computer
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |